Skip to content
EN IT
Download

F1 25 (2026 Season Pack) UDP Telemetry Setup for PC

Running EA SPORTS F1 25 with the 2026 Season Pack and PitStatus on the same PC allows local telemetry streaming over the loopback interface. This setup delivers the lowest latency and highest reliability because data transfers entirely in computer memory without routing through your home Wi-Fi network.

The following instructions walk through the exact in-game settings, how to verify incoming telemetry, and how to fix the most common connection hurdles.

Step-by-step PC setup

  1. Open the telemetry settings: Launch EA SPORTS F1 25 with the 2026 Season Pack on your PC, navigate from the main menu to Options > Settings > Telemetry UDP (or Game Settings > UDP Telemetry).
  2. Turn on UDP Telemetry: Change the UDP Telemetry setting to On so the game engine starts outputting vehicle telemetry.
  3. Disable broadcast mode: Set UDP Broadcast Mode to Off, ensuring telemetry routes directly to your local loopback address.
  4. Enter the loopback IP address: Set the IP Address field to 127.0.0.1, which points straight to this computer without routing data outside the operating system.
  5. Set the UDP port: Set UDP Port to 20777, which matches the default listening socket in PitStatus.
  6. Set the send rate and format: Set UDP Send Rate to 60 Hz for full sample density, and confirm UDP Format is set to 2026.
  7. Enable public telemetry: Set Your Telemetry to Public and Show Online ID to On so you can capture rival lap data in multiplayer lobbies.
  8. Drive out of the garage: Start a Time Trial, Practice, or Race session and drive out onto the asphalt to activate the live telemetry stream.

Check that data is arriving

You can verify that PitStatus is receiving data through several visual indicators in the application:

  • In the app header and inside the Game Setup panel, the connection badge changes from a pulsing grey indicator to a solid green dot labelled "F1 Connected · Data arriving".
  • When you are driving on track, the reception indicator confirms active reception alongside the circuit name and session type.
  • While sitting in the garage or navigating game menus, F1 25 (2026 Season Pack) suspends or reduces telemetry; live telemetry begins as soon as the car enters the active circuit.

Common problems

  1. Windows Firewall blocking incoming UDP data: If the game is running on track but PitStatus remains on "Waiting for game", Windows Firewall may be intercepting port 20777. Open the Connection panel in PitStatus and click "Repair Windows Firewall" to re-apply the local subnet rule, or open Windows Defender and ensure incoming UDP traffic on port 20777 is permitted.
  2. Port 20777 occupied by another application: Another telemetry tool, racing dashboard, or background utility might already have bound port 20777 (EADDRINUSE). Close the conflicting program, or change the listening port in PitStatus to an alternate port and update the UDP Port setting in F1 25 (2026 Season Pack) to match.
  3. Telemetry options greyed out in the game: If the telemetry options in F1 25 (2026 Season Pack) cannot be toggled, open the game's general gameplay settings and change the driving style or assistance mode to "Expert". Casual and standard preset styles sometimes lock advanced telemetry configurations.
  4. Incompatible legacy telemetry format: If PitStatus shows an error indicating unsupported telemetry data, check that the UDP Format setting in the game is set to 2026. Setting this option to an older game year will prevent PitStatus from parsing lap and sector structures correctly.
  5. Car stationary in garage or main menu: The game only sends continuous telemetry when you are driving on the circuit. Entering a session and leaving the pit lane is required to confirm that the telemetry flow is active.

See it on your own laps

Install PitStatus, drive a session and open the Engineer.

Download for Windows

Free. Windows 10 and 11. Works with F1 25 (2026 Season Pack) on PC, PS5 and Xbox Series X|S.