F1 25 (2026 Season Pack) Lap Comparison with the Race Engineer
The Race Engineer analyses two laps corner by corner and explains where you lose lap time without forcing you to decipher raw squiggly lines. It translates telemetry into direct track advice so you know whether to brake later, release earlier, or pick up the throttle with more commitment. We do not just give you numbers, we tell you what to do.
The problem
Looking at a time delta on your steering wheel tells you that you are slower, but never why. Most drivers lose time in slow corners through poor brake modulation, late throttle pickup, or hesitant mid-corner commitment. Without an engineer watching your telemetry, you are left guessing whether your braking point was too cautious or your exit compromised by wheelspin.
What you see
The panel segments every corner of the circuit into defined driving phases: approach, pre-braking, entry, mid-corner, exit, and exit straight. Each zone card displays the exact time difference, accompanied by concise notes explaining the cause behind the gap.
Selecting a corner centres the track map on that specific bend and synchronises all telemetry graphs across that exact distance window. When analysing real sessions, the difference often comes down to delicate pedal transitions. For example, during testing at Zandvoort comparing a 1:09.848 against a 1:10.037, the data showed a gain of 0.094 s through turns 11 and 12 simply because the faster lap released the brake pedal ten metres earlier, carrying more minimum speed through the apex without hurting the exit.
How to use it in a race weekend
- Complete a qualifying simulation run in free practice and set your personal best lap.
- Select your best lap as P1 and choose a faster reference lap or a session rival as P2. Online you see the full telemetry of drivers who have set it to public in the game settings.
- Open the Race Engineer panel to identify the two or three corners where your time loss is greatest.
- Review the practical recommendations for braking release, initial throttle hit, and gear selection.
- Return to the track in the next practice stint and apply the adjusted pedal inputs.
Related
Read our detailed technical guide on how to read telemetry to understand pedal traces, or inspect raw overlays in telemetry charts.